Filter
Top Products
3 Test and Diagnostic Operation Handbook 3.7 32-Bit for Sycard Test
3.7 32-Bit for Sycard Test
Checks the computer’s 32-bit PC Card function. The test runs when the Sycard is inserted into a
specific slot for test in sequence as shown below.
NOTE: To execute this test, you must make sure the test connector of Sycard marked
“CARDBUS”.
There are two slots to be tested. A “beep” is generated during test for each slot.
The screen should display as below, indicating whether the test passed or failed when finished.
3-10 Satellite A30 Series Maintenance Manual