Filter
Top Products
3.1 The Diagnostic Test 3 Test and Diagnostic Operation Handbook
3.1 The Diagnostic Test
This chapter explains how to use the Test & Diagnostic program (based on DAL00 T&D
Version: 1.0) to test the functions of the computer’s hardware modules. The Test & Diagnostic
Program is stored on the T&D diskettes. The program consists of a series of tests that run
automatically when the Diagnostics Program items are selected and executed.
NOTES: To start the diagnostics, follow these steps
1. Check all cables for loose connections.
2. Exit this program when you are at Main Menu.
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests:
CONFIG CHECK TEST
DMI CHECK TEST
PIO LOOPBACK TEST
RTC TEST
PC CARD TEST
SPEAKER AUDIO TEST
FAN ON/OFF TEST
MODEM TEST
MAIN BATTERY CHARGE TEST
FDD TEST
CD-ROM TEST
KEYBOARD TEST
MOUSE(PAD) TEST
LCD PIXELS MODE TEST
LID SWITCH TEST
HDD R/W TEST
LAN TEST
Satellite A30 Series Maintenance Manual 3-1