Filter
Top Products
4.7 Wireless LAN Unit 4 Replacement Procedures
4.7 Wireless LAN Unit
Removing the Wireless LAN Unit
To remove the wireless LAN unit, follow the steps below.
1. Turn the computer upside down and loosen the two embedded screws.
2. Remove the wireless LAN module cover.
3. Disconnect the black and white wireless LAN connector cables.
Figure 4-18 Detaching the connector cables
4. Gently press out on the latches locking the wireless LAN unit into the slot. One end of
the wireless LAN unit pops up.
Figure 4-19 Pressing the wireless LAN unit latches
5. Grasp the end of the wireless LAN unit and pull it out.
CAUTION: Do not touch the connectors on the wireless LAN unit or on the
computer. Debris on the connectors may cause malfunction.
Satellite A30 Series Maintenance Manual 4-17