Filter
Top Products
3 Test and Diagnostic Operation Handbook 3.3 Executing the Diagnostic Test
3.3 Executing the Diagnostic Test
The config check test checks unit configuration. It includes:
CPU type
System memory size
ODD type
HDD type & capacity
BIOS version
This test needs input of a unit Part Number to make comparison with known SKU data.
NOTE: To execute this test, you must input unit Part Number as “Uppercase Character”.
It will show if its configuration is correct in green or incorrect in red.
The screen should display as below, indicating whether the test passed or failed after comparison.
3-6 Satellite A30 Series Maintenance Manual