Filter
Top Products
4.19 FL Inverter Board 4 Replacement Procedures
4.19 FL Inverter Board
Removing the FL Inverter Board
To remove the FL inverter board, follow the steps below.
1. Remove one strip of tape securing the HV cable and two strips of tape to uncover two
screws securing the FL inverter board.
Figure 4-76 Removing the tape
2. Remove the two M2×3 black screws securing the FL inverter board.
Figure 4-77 Removing the FL screws
3. Carefully lift up the FL inverter board and disconnect the FL FPC and the HV cable
from the FL inverter board.
Figure 4-78 Detaching the FL FPC and HV cable
Satellite A30 Series Maintenance Manual 4-47