Filter
Top Products
4 Replacement Procedures 4.17 Speakers
Installing the Speakers
To install the speakers, follow the steps below.
1. Place the top cover upside down and remove the TouchPad bracket and board as
described in previous sections of the manual.
2. Detach the LED/button FFC cable and the speaker cable from the adhesive glue
binding them to the cover so you can slide the speaker wires under them.
3. Seat each speaker. The speaker closest to the speaker cables goes on the right.
4. Secure each speaker with one M2.5×5 screw.
5. Reattach the LED/button FFC cable and the speaker cable to the adhesive glue on the
cover so you can slide the speaker wires under them.
6. Slide the speaker wires under the LCD/Button board bracket.
7. Reattach the TouchPad bracket and board as described in previous sections of the
manual.
4-44 Satellite A30 Series Maintenance Manual