Filter
Top Products
6287 ALLY PLUS User’s ManualPage 11-10
45 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
46 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
47 — Reserved
This option is reserved in the current ULTRA firmware, and it has no
equivalent in the ALLY PLUS.
48 — Continuous Bell Ringing
This option is equivalent to ALLY PLUS Option #75. A value of Y, B,
C or D is executed as though it were an ALLY PLUS value of 01, and a
value of N or A is executed as an ALLY PLUS value of 00. The
General Configuration Report will display yes or no.
Note: Only bell ringing at the printer is supported, because the ALLY PLUS
is not equipped with a bell.
49 — Eliminate DSC C0 05 Header
This option is equivalent to ALLY PLUS Option #76. A value of Y is
executed as though it were an ALLY PLUS value of 01, and a value of N
is executed as an ALLY PLUS value of 00. The General Configuration
Report will display yes or no.
50 — Alternate Host Enable/Disable
This option has no effect in the ALLY PLUS, because all alternate host
ports are always enabled.
51 — DSC EM Generates CR/LF in Infinite Line Length
This option is equivalent to ALLY PLUS Option #26. A value of Y is
executed as though it were an ALLY PLUS value of 01, and a value of N
is executed as an ALLY PLUS value of 00. The General Configuration
Report will display yes or no.