Filter
Top Products
Page 3-13CONFIGURATION
Note: A value of 00 implies an infinite page length. In infinite page length,
the ALLY PLUS will not send a form feed to the printer unless the user or
the users application has embedded a form feed in the data stream. To
avoid unexpected formatting results, this option should be set to 00 (infinite
page length) if any of the following are true:
the user or the users application embeds escape sequences in the
data stream
the user or the users application embeds pseudo transparency
strings in the data stream
the user embeds !ALLY! commands (configuration, translate table or
PFS commands) within print jobs.
25 — DSC line spacing
If the ALLY PLUS detects a line feed in the incoming data stream, or if it
must send out a line feed itself, it will output the number of line feeds
specified by this option. The user may enter a value between 01 and 09. To
program this option, use the appropriate sequence:
!ALLY!25=01; single spacing (default)
!ALLY!25=02; use this for double spacing
26 — DSC EM generates CR/LF even in infinite line length
Typically, an EM (end of message) character will generate a CR/LF
sequence by the ALLY PLUS, unless Option #22 has been set to 00
(infinite line length). This option is provided for users who require a CR/LF
sequence to be sent to the printer upon receipt of a DSC EM, even when the
ALLY PLUS is in infinite line length. To activate this feature, use a value
of 01. The default value is 00. Refer to Section 8 DSC Data Streams for
more information. Program this option with these sequences:
!ALLY!26=00; EM received, NL is not sent (default)
!ALLY!26=01; EM received, NL is sent