Filter
Top Products
6287 ALLY PLUS User’s ManualPage 4-8
%29 — LU3 Bind
A job boundary PFS used when Option #57 is enabled. This PFS is sent
prior to LU3 data and prior to the LU3 begin bracket PFS. One use of this
PFS might be to reset the printer. By default there is no data in this PFS.
%30 — LU3 Unbind
A job boundary PFS used when Option #57 is enabled. After the host is
done sending LU3 data, this PFS will be sent. By default there is no data in
this PFS.
%31 — Tray 1
This command is reserved for future use by AGILE.
%32 — Tray 2
This command is reserved for future use by AGILE.
%33 — Tray 3
This command is reserved for future use by AGILE.
%34 — Envelope Tray 1
This command is reserved for future use by AGILE.
%35 — Envelope Tray 2
This command is reserved for future use by AGILE.
%36 - %51 — Reserved
PFSs %36 through %51 are reserved.
%52 — Alternate LU1 Begin Bracket
A job boundary PFS used when Option #57 is enabled. This PFS is sent just
prior to the actual LU1 data. If the PFS is empty, nothing will be sent to the
printer. By default there is no data in this PFS.