Filter
Top Products
6287 ALLY PLUS User’s ManualPage 4-4
PFS Descriptions
The ALLY PLUS can store up to 64 PFSs in a dynamic 12K space. The
following is a complete list of PFSs currently offered. A description of
when each PFS is triggered by the host application is included, although
PFSs also can be triggered by the user at any time.
%00 — Power On
When the ALLY PLUS receives printable data for the first time after power
up or RESET, or when this PFS is triggered directly by the user, this PFS is
sent to the printer.
%01 — Printer Reset
This PFS resets the printer.
%02 — Bolding On
If DisplayWrite 370 is enabled and the ALLY PLUS detects the sequence
[character-backspace-same character], this PFS will be sent to the printer.
Note: This is not used when DisplayWrite 370 is disabled (see Option #70)
unless it is triggered directly by the user.
%03 — Bolding Off
If bolding was on previously, and if a [character-non-backspace] sequence
is detected, this PFS is sent to the printer. Note: This is not used when
DisplayWrite 370 is disabled (see Option #70) unless it is triggered directly
by the user.
%04 — Overstriking On
If a [character-backspace-different character] sequence is detected, this
PFS is sent to the printer. Note: This is not used when DisplayWrite 370 is
disabled (see Option #70) unless it is triggered directly by the user.
%05 — Overstriking Off
If overstriking was on previously, and if a [character-character] sequence
is detected, this PFS is sent to the printer. Note: This is not used when
DisplayWrite 370 is disabled (see Option #70) unless it is triggered directly
by the user.