Filter
Top Products
Page 3-7CONFIGURATION
03 — Plotter support
Mode 9 on the front panel of the ALLY PLUS will produce four tests on the
attached plotter that verify baud rate, protocol, etc. For these tests to
function correctly, select the appropriate plotter from the list below. When
programming this option, use one of these sequences:
!ALLY!03=01; for HP 7221 plotter attachment
!ALLY!03=02; for HP 7475 plotter attachment
!ALLY!03=03; for HP 7550 plotter attachment (default)
!ALLY!03=04; for Zeta GML plotter attachment
05 — Plotter support
Mode 9 on the front panel of the ALLY PLUS will produce four tests on the
attached plotter that verify baud rate, protocol, etc. For these tests to
function correctly, select the appropriate plotter from the list below. When
programming this option, use one of these sequences:
!ALLY!03=01; for HP 7221 plotter attachment
!ALLY!03=02; for HP 7475 plotter attachment
!ALLY!03=03; for HP 7550 plotter attachment (default)
!ALLY!03=04; for Zeta GML plotter attachment