Filter
Top Products
6287 ALLY PLUS User’s ManualPage 3-4
To reset an individual configuration parameter to its factory default setting,
enter the trigger, the Option number and the terminator. The following
example resets the top margin for SCS data streams:
!ALLY!13;
A General Configuration Report with default values selected can be found
in the Appendix. The user can print the current General Configuration
Report at any time using Mode 5 from the front panel.
Changing Configuration Options Within a Print Job
If the user intends to make configuration changes within a coax host print
job, Option #12 SCS right margin and Option #22 DSC right margin
should be set to 00 (infinite line length), Option #14 SCS bottom margin
and Option #24 DSC bottom margin should be set to 00 (infinite page
length), and Option #70 DisplayWrite 370 support should be set to 00
(disabled). Otherwise, unpredictable formatting errors could occur.