6287 ALLY PLUS User’s ManualPage 5-4
Function Options
The following table describes all valid non-zero values in a function table.
A function value of zero (00) in the table indicates a one-for-one translation
of a source character to a printable character. A non-zero value has special
meaning. Note that an asterisk (*) indicates that the function is applied only
when rows and columns are being counted (i.e., when Option #70
DisplayWrite 370 is enabled). Items in italics apply only to the ASCII from
ASCII table when programming the unit from an alternate host.
Value Meaning
01 End of message*
02 Send a form feed and clear the line count*
03 Send new line and clear column count*
04 Vertical channel select (SCS only)* or ASCII hex data
05 Send CR and clear column count*
06 Treated as null or ASCII numeral
07 Bell character (see Option #75)
08 Move left one space in print buffer*
09 Tab right to next tab stop*
0A Send line feed and add to line count*
0B Send line feeds until next vertical tab stop*
0C reserved for future use
0D reserved for future use
0E Add to line count*
0F reserved for future use
10 Escape handler (SCS 2Bxx) or ASCII semicolon (;)
11 reserved for future use
12 Pseudo transparency trigger
13 reserved for future use
14 Graphic escape (SCS only)
15 IBM 35h transparency trigger (SCS only)
16 Xerox 36h transparency trigger (SCS only)
17 reserved for future use
18 Display field switch ON
19 Display field switch OFF or ASCII asterisk (*)
1A Character is ignored or ASCII dollar sign ($)
1B UDK trigger or ASCII Y/N
1C Xerox font trigger (i)
1D UDK definition trigger (=)
1E ALLY PLUS program mode trigger (!)
1F Pass character w/o translation or ASCII percent sign (%)