Filter
Top Products
Printing
Phaser 6500 Color Laser Printer
User Guide
74
Printing on Glossy Cardstock from Tray 1
1. Gently pull out the paper tray and slide open the paper guides, then open the output tray to hold
the printed sheets. For details, see Loading Paper in Tray 1 on page 51.
2. Fan the sheets to release any that are stuck together.
3. Insert the glossy cardstock into the tray with the print side face up.
Note: Do not load more than 25 sheets. Do not load the paper above the fill line indicated on the
tray. Overloading the tray can cause jams.
4. In the application you are using to print from, open the Print dialog box and select the
Phaser 6500 printer. you can use the PCL or the PostScript driver.
5. Click the Properties button.
6. In the Paper/Output tab, do the following:
a. From the Paper Size list, select the paper size.
b. From the Paper Type list, select LW Gloss Card or HW Gloss Card, as appropriate.
c. From the Paper Tray list, select Tray 1.
7. Select any other desired settings, such as page orientation, and then click OK.
8. In the Print dialog box, click OK (or Print) to start printing.
Printing on Glossy Cardstock from the Manual Feed Slot
1. Slide the paper guides of the manual feed slot to fit the sheet and then open the output tray of the
printer. For details, see Loading Paper in the Manual Feed Slot on page 53.
2. With the top of the sheet toward the printer, slowly insert one sheet into the manual feel slot until
it stops. Ensure that the sheet is entered straight, not crooked. If necessary, reposition the paper
guides to fit the sheet.
p6500-020