Filter
Top Products
Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide
95
System Setup Menu
Use this menu to configure the general operation settings of the printer. For example, time to energy
saver mode, alarm settings, and so on.
Item Description
Power Saver Time Specifies the length of time, 5–60 minutes, that the printer is idle before
going into Energy Saver mode. For details on setting the Power Saver Time,
see Setting the Power Saver Time on page 23.
Audio Tones Specifies whether an alarm sounds when one of the following printer errors
or actions occurs. The alarms are set to Off by default. The volume cannot
be adjusted.
• Control Panel
•Invalid Key
• Machine Ready
•Job Complete
•Fault Tone
•Alert Tone
•Out of Paper
•Low Toner Alert
•Base Tone
Fault Time-Out Specifies the amount of time before the printer automatically deletes a
print job when there has been a job error.
Set the default timeout, up to 60 seconds, in one-second increments.
Time-Out Automatically cancels a print job when it goes beyond a specified time. Set
the duration allowed for the print time. When the time expires, the print job
is canceled. Duration can be set for up to 30 minutes in one-minute
increments.
Language Specifies the language used in the control panel menus and in printed
Information Pages.