Filter
Top Products
Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide
98
PCL Setup Menu
Use this menu to configure settings for PCL. The PCL driver is used for applications requiring PCL. For
PCL print driver options, see Printing Options for Windows PCL Driver on page 63.
Clear Storage Deletes documents stored in the RAM in the printer.
Reset Fuser Resets the fuser life counter to the starting point (0).
Item Description
Paper Tray Specifies the paper tray to use when the Paper Tray setting in the PCL print
driver is set to Auto Select.
•Auto (default)
•Tray 1
• Tray 2 (optional; if installed)
•Manual Feed Slot
Paper Size Specifies the default paper size to print.
Orientation Specifies the default paper orientation:
• Portrait (default)
• Landscape
2-Sided Specifies 2-sided printing settings:
• 2-Sided Print: Specifies whether to perform 2-sided printing. The default
is Off. The default setting is ON when the duplex unit is installed.
• Binding Edge: Specifies the binding direction from Flip Long Edge
(default) or Flip Short Edge.
Font Specifies the font to use. The default font is Courier.
Symbol Set Specifies the font to use for symbols. The default is Roman-8.
Font Size Specifies the font size. The default size is 12.00. You can specify a value
from 4.00 through 50.00 in increments of 0.25. Available only for
typographic fonts.
Font Pitch Specifies the character spacing. You can specify a value from 6.00 through
24.00 in increments of 0.01. The default is 10.00.
Form Line Specifies the form line (the number of lines per form). You can specify a
value from 5 through 128 in increments of 1. The default is 60.
Quantity Specifies the number of copies to print. You can specify a value from 1
through 999. The default is 1.
Item Description