Filter
Top Products
Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide
97
Maintenance Mode Menu
Use this menu to configure color registration and to reset defaults.
Odd Page 2-Sided
(Phaser 6500DN printer
configuration only)
If the optional duplex unit is installed, this item tells the printer how to
handle the last odd page in a 2-sided print job.
•1-sided
•2-sided
Power On Wizard Resets the Power On Wizard. The first time the printer is turned on, a special
menu appears on the printer control panel. Use it to configure initial
settings such as language, default paper size, and network settings. This
setting enables the administrator to reset the Power On Wizard so that the
special menu appears when the printer is turned on.
Item Description
F/W Version Displays the current firmware version installed in the printer.
Auto Regi Adj. Auto Registration Adjust. When On (the default), the color registration is
adjusted automatically.
Adjust Color Regi. Adjust Color Registration. Used to correct the color registration between
colors. For details, see Color Registration on page 136.
• Auto Adjust: Use to force an automatic color registration correction.
• Color Regi Chart: Prints the color registration chart used to check for
correct color registration.
• Enter Number: Use to select and correct color registration numbers.
• Fast Scan (1): For setting horizontal color registration, or Slow Scan (2)
for setting vertical color registration.
Clear Developer Resolves print-quality defects associated with charge problems after
high-coverage print jobs.
Toner Refresh Resolves print-quality defects associated with charge problems after
low-coverage jobs.
IU Refresh (Imaging Unit
Refresh)
Helps improve imaging unit operation by performing a density and color
curve calibration.
Init Print Meter Initialize Print Meter. Resets the Print Meter.
Initialize NVM Resets the settings in the nonvolatile memory (NVM), except for the
network settings, to their defaults. NVM is memory that stores the printer
settings even after the power is turned off. After selecting this option and
restarting the printer, all the menu settings are reset to their default values.
Note:
• You cannot execute the Initialize NVM setting during printing.
• After changing this setting, turn off the printer and then turn it on
again to activate the change.
Item Description