Filter
Top Products
Control Panel Menus
Phaser 6500 Color Laser Printer
User Guide
93
Admin Menu
The Admin Menu contains the following sub menus:
• Network Setup Menu on page 93
• USB Setup Menu on page 94
• System Setup Menu on page 95
• Maintenance Mode Menu on page 97
• PCL Setup Menu on page 98
• PostScript Setup Menu on page 100
• Control Panel Menu on page 101
Use the Admin Menu to access the configuration settings of the printer.
Network Setup Menu
Use this menu to configure printer settings for jobs sent to the printer through a network port.
Notes:
• The settings in the Network Setup menu cannot be selected if you access this menu during
printing.
• Restart the printer to activate menu setting changes. After changing settings, turn off the
printer, then turn it on again.
Item Description
Ethernet Specifies the Ethernet communication speed and modes.
• Auto (default): Automatically changes between 10M Half Duplex, 10M
Full Duplex, 100M Half Duplex, 100M Full Duplex, and 1000 Full Duplex.
•10Base Half
•10Base Full
•100Base Half
•100Base Full
• 1000Base Full
TCP/IP Specifies the settings to use for TCP/IP:
• IP Mode: IPv4 Mode, IPv6 Mode, or Dual Stack
• IPv4: Get IP Address, IP Address, Network Mask, Gateway Address
• IPsec: IP security protocol; available when enabled