Filter
Top Products
7
Basic Operations
Turning On the Projector
1
Turn on the power for all equipment
connected to the projector.
For a video source, press the [Play] button at the
video source to start playback.
2
Press the [STANDBY/ON] button on the
projector's control panel or the
button on the remote control to turn on
the power.
The indicator flashes green, and after a
short period projection starts.
Check that the indicator has stopped
flashing and lights green.
3
If more than one signal source has been connected or the images are not
being projected, use the remote control or control panel buttons to select the
signal source.
If you press the [INPUT] button on the projector's control panel or
the button on the remote control, the selection menu will be
displayed.
If you select
"INPUT A" or "INPUT B", a menu for selecting the
signal format will be displayed. Select the format which matches
the video signals from the connected equipment.
If using the remote control, the signal format changes in the
following order each time the or button is pressed.
Component →
→ →
→ RGB TV →
→ →
→ RGB PC
Turning On the Power and Projecting Images
The buttons on the remote control and the projector's control panel cannot be
operated while the indicator is flashing green. Wait until it lights steadily.
Port
Button to press
Display at top-right of screen
Projector or
remote control
Remote control
INPUT A
[INPUT]
or
INPUT A (Component) or INPUT A (RGB TV) ,
INPUT A (RGB PC)
INPUT B
INPUT B (Component) or INPUT B (RGB TV) ,
INPUT B (RGB PC)
S VIDEO S-Video
VIDEO Video
D4 VIDEO D4 (Component)
HDMI HDMI (Component) , HDMI (RGB TV) , HDMI (RGB PC)
STANDBY/ON
ESCAPE MENU
ASPECT INPUT
PATTERN SETTING
MENU
PAT TIRIS
SETTING
FOCUS
ESCAPE
ZOOM
Lights green
Remote control
Projector
INPUT
A
B
S VIDEO
VIDEO
D4
HDMI
Input A
Input B
S-Video
Video
D4
HDMI
Source
INPUT
A
B