Filter
Top Products
17
Basic Operations
Adjusting the Image Quality
The brightness of the images can be adjusted.
When projecting in dark rooms or onto small screens and the images appear too bright, decrease the setting.
1
Press the [SETTING] button on the
projector's control panel or the
button on the remote control.
The line menu will be displayed over the images
that are being projected.
The adjustment mode changes as follows each
time the [SETTING] button on the projector's
control panel is pressed.
Zoom →
→→
→ Focus →
→ →
→ Iris
2
Select a setting value.
If using the projector's control panel, press the
- or + button.
If using the remote control, tilt the button
horizontally.
Adjustment is also possible while a test pattern is
being projected.
3
Exit adjustment mode.
Press the [ESCAPE] button on the projector's
control panel or the button on the remote
control.
Brightness adjustment (Iris adjustment)
The Lamp Power menu can also be used to make the adjustment. (p.34)
Projector
Remote control
STANDBY/ON
ESCAPE MENU
ASPECT INPUT
PATTERN SETTING
MENU
PAT T
SETTING
ESCAPE
ZOOM FOCUS
IRIS
IRIS
Projector
Remote control
STANDBY/ON
ESCAPE MENU
ASPECT INPUT
PATTERN SETTING
HIDE
INPUT
MENU
PAT TIRIS
SETTING
ASPECT
ESCAPE
LIGHT
STANDBY/ON
ESCAPE MENU
ASPECT INPUT
PATTERN SETTING
MENU
PAT T
SETTING
ESCAPE
ZOOM FOCUS
IRIS
Projector
Remote control
IRIS