Filter
Top Products
55
Appendices
Maintenance
The lamp operating time must always be reset after the lamp has been replaced with a new one.The projector
has a built-in lamp operating time counter.
A replacement message is displayed when the counter reaches a certain amount.
1
Press the [STANDBY/ON] button on the
projector's control panel or the
button on the remote control.
2
Press the [MENU] button on the
projector's control panel or the
button on the remote control.
The menu will be displayed.
3
Select "Lamp Hours Reset" from the
"Reset" menu.
Press the button on the projector's control
panel of the button on the remote control.
4
Reset the lamp operating time.
Select "Yes", and then press the button on the
projector's control panel of the button on the
remote control.
Resetting the Lamp Operating Time
Do not reset the lamp operating time except after the lamp has been replaced, otherwise
the lamp replacement period will not be indicated correctly.
STANDBY/ON
ESCAPE MENU
ASPECT INPUT
PATTERN SETTING
MENU
PAT TIRIS
SETTING
FOCUS
ESCAPE
ZOOM
Projector
Remote control
STANDBY/ON
ESCAPE MENU
ASPECT INPUT
PATTERN SETTING
HIDE
INPUT
PAT TIRIS
SETTING
ASPECT
ESCAPE
LIGHT
MENU
Projector
Remote control
MENU
Image
Lamp-Hours Reset
Memory Reset
All Reset
:Return :Select :Enter
Setup Info
Return
Reset
No
No
Ye s
Execute
[Lamp-Hours Reset]
:Return -,+:Select :Execute