Filter
Top Products
Adjusting the Image Quality
18
The following six picture modes have been preset for use with images with varying characteristics. Use the
select menu to select a picture mode that best suits the images.
The default settings for each mode are given below.
* The CB (color balance) filter is fixed for each mode.
* If the picture mode is set to "PC", then the "Gamma", "Abs. Color Temp." and "Flesh Tone" settings cannot
be adjusted.
1
Press the [MENU] button on the
projector's control panel or the
button on the remote control.
The menu will be displayed.
Select "Image" - "Picture Mode".
2
Select the picture mode.
If using the projector's control panel, press the
or button to select the picture mode, and press
the
button to confirm the selection.
If using the remote control, tilt the button
vertically to select the picture mode, and press
the button to confirm the selection.
Selecting the picture mode
Mode name Use
Dynamic Ideal for viewing games and sporting competitions in bright rooms.
Bright Ideal for viewing movies in bright rooms.
Standard
Ideal for viewing in dark rooms. It is recommended that you use this mode when
making color adjustments.
Cinema Ideal for watching movies in dark rooms.
Cinema Black Ideal for watching movies in rooms that are completely shaded.
PC
This mode is ideal for playing back sRGB-compliant images such as those from a
computer.
Mode name CB Filter Gamma
Abs. Color Temp.
(default value)
Iris
(default value)
Flesh Tone
(default value)
Lamp Power
Dynamic OFF - 7000k 100 5 100
Bright OFF - 7000k 100 5 100
Standard ON 2.2X (basic) 6500k 100 3 75
Cinema ON - 6500k 100 3 75
Cinema
Black
ON - 6500k 75 3 75
PC ON 2.2X (fixed) 6500k 100 3 75
You can also make the setting from the
line menu. (p.38)
Projector
Remote control
STANDBY/ON
ESCAPE MENU
ASPECT INPUT
PATTERN SETTING
HIDE
INPUT
PAT TIRIS
SETTING
ASPECT
ESCAPE
LIGHT
MENU
MENU
Dynamic
[Picture Mode]
Bright
Standard
Cinema
Cinema Black
Return
:Setting:Return
:Select
ESC
PC