Filter
Top Products
Maintenance
56
Vertical stripe interference may appear in the projected images at times. If this vertical stripe interference
impairs image viewing, the images can be adjusted by carrying out the following procedure.
Example
Note the following points when carrying out the procedure below.
•
••
•
Turn on the power and let the projector stand for approximately 10 minutes after the lamp turns on before
starting the following procedure.
•
••
• The following adjustment can be carried out more effectively if the room is made dark beforehand.
•
••
• The adjustment can also be carried out without an image source connected.
•
••
• If the vertical stripe interference becomes a problem again while using the projector after the adjustment
has been carried out, you can repeat the adjustment procedure to maintain clear images.
1
Press the [MENU] button on the
projector's control panel or the
button on the remote control.
The menu will be displayed.
Select "Setup" - "Operation" - "LCD Panel
Adjustment".
2
Adjust the vertical stripe setting for
each R/G/B color component.
First select "Vertical Stripe Adjustment R" and
then press the button on the projector's control
panel or the on the remote control.
The red tone adjustment screen will be displayed.
If vertical stripe interference appears in the projected images
Image with vertical stripe interference Image after adjustment
ESC
Image
Sleep Mode
30min.
100
RS-232C Off
Fan
Lamp Power
Standby Mode
Trigger Out
Lock Setting
LCD Panel Adjustment
Setup Info
Return[Operation]
Reset
:Enter:Return :Select
MENU
ESC
Image
Vertical Stripe Adjustment R
Vertical Stripe Adjustment G
:Enter:Return :Select
Vertical Stripe Adjustment B
Setup Info
Return[LCD Panel Adjustment]
Reset