Filter
Top Products
Using the Menu Functions
30
The image quality adjustment items are determined by the input port (image signal) that is selected.
*1 The setting values are stored separately for each image source and signal type.
*2 The settings are stored separately for each image source and the picture mode setting.
"Image" Menu
Picture Quality
Main menu Function
Default
setting
Input
Adjustment *
1
These settings can be adjusted if the output level of the connected equipment is weak and
the images appear dark. The two settings cannot be made simultaneously. You can only
select one of them to be adjusted.
White Level/
Black Level
•
••
•
White Level/Black Level : These adjust the dark and light areas of images
White Level : Adjusts the brightness of bright shades without changing the black
level.
When the setting is changed to the - side, bright areas become clearer.
Black Level : Adjusts the brightness of dark shades without changing the white level.
When the setting is changed to the + side, dark areas become clearer.
White Level:
Median value
(0)
Black Level:
Median value
(0)
•
••
•
Input Level/Contrast : Adjusts the overall brightness of the images.
Input Level : Adjusts the overall brightness of the images.
When the setting is changed to the + side, the images appear brighter
overall.
Contrast : Adjusts the difference between bright and dark areas.
When the contrast is increased, sharper images are obtained.
Input Level:
Median value
(0)
Contrast:
Median value
(0)
Iris*
2
The brightness of the images can be adjusted.
When projecting in dark rooms or onto small screens and the images appear too bright,
decrease the setting.
100 (Depends
on picture
mode)
Color Intensity *
1
(Setting is only possible when signals other than computer signals are being input.)
This adjusts the color intensity for the images.
Median value
(0)
Tint *
1
(Setting is only possible when signals other than computer signals [S-Video or
NTSC
signals] are being input.)
This adjusts the image tint.
Median value
(0)
Sharpness *
1
This adjusts the image sharpness. 0
Tracking *
1
(Setting is only possible when computer signals are being input to the INPUT A or
INPUT B port.)
This adjusts the images if vertical stripes appear in the images.
Depends on
input signal
Sync. *
1
(Setting is only possible when computer signals are being input to the INPUT A or
INPUT B port.)
This adjusts the images if flickering, fuzziness or interference appear in the images.
•
••
•
Flickering and fuzziness may also appear in images when the brightness, contrast,
sharpness and keystone correction settings are adjusted.
•
••
•Clearer adjustments can be obtained if you adjust the tracking first and then adjust the
sync.
Depends on
input signal
Image
Picture Quality
Color Adjustment
Picture Mode
-,+:Select :Enter
Dynamic
Memory Save
Reset
Auto Setup
Setup Info
Return
Reset
Image
Picture Quality
Color Adjustment
Picture Mode
-,+:Select :Enter
Dynamic
Memory Save
Reset
Setup Info
Return
Reset
•
••
• INPUT A, B (Component),
INPUT A, B (RGB TV),
HDMI, VIDEO, S-VIDEO
•
••
• When computer signals are being input
INPUT A, B (RGB PC)