Filter
Top Products
Maintenance
54
4
Loosen the screws fixing the lamp.
5
Remove the old lamp.
Pull the lamp out straight.
6
Install the new lamp.
Securely insert the lamp so that it is facing
correctly.
7
Securely tighten the lamp fixing
screws.
8
Install the lamp cover, then tighten the
lamp cover fixing screws.
•
••
•
Install the lamp securely. For safety, the lamp will turn off automatically
when the lamp cover is opened. Moreover, the lamp will not turn on if the
lamp or the lamp cover is not installed correctly.
•
••
• This product contains a high intensity lamp that contains a small amount of
mercury. Disposal of this material may be regulated due to environmental
considerations. For disposal information in the United States, refer to the
Electronic Industries Alliance web site
: www.eiae.org