Filter
Top Products
Advanced Operations
31
Using the Menu Functions
If the picture mode is set to "PC", "Color Adjustment" cannot be selected.
*1 The setting values are stored separately for each image source and signal type.
*2 The settings are stored separately for each image source and the picture mode setting.
The picture mode can be selected from six different settings in accordance with the images being projected.
(Default setting: Dynamic) (p.18)
*1 The setting values are stored separately for each image source and signal type.
This can be used to save the current "Image" and "Setup" configuration menu settings and the aspect. (p.26)
(Setting is only possible when computer signals are being input.)
This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts images
to their optimum condition when the input signal is changed.
(Default setting: ON)
*1 The setting values are stored separately for each image source and signal type.
Returns all adjustment values in the "Image" menu (other than the values stored using the "Memory Save"
command) to their default values. "Memory Save" is reset using the "Memory Reset" command. (p.36)
Color Adjustment
Main menu Function
Default
setting
Abs. Color
Temp. *
2
•
••
•Abs. Color Temp. : This adjusts the overall tints of the images in accordance with the
images being projected. (p.25)
7000K
(Varies
depending on
country of
purchase)
(Depends on
picture mode)
•
••
•Flesh Tone : This adjusts the flesh tones of people who appear in the images.
(p.25)
5 (Depends
on picture
mode)
RGB *
1
This lets you adjust the offset, gain and gamma for each of the R/G/B color components.
(p.25)
Offset R/G/B:
0
Gain R/G/B:
0
Gamma R/G/
B: 2.2
Picture Mode *
1
Memory Save
Auto Setup *
1
Reset