Filter
Top Products
27
Advanced Operations
Functions for Enhancing Projection
2
Select "Memory Save" from the sub-
menu of the "Image" menu, and then
press the button on the projector's
control panel or the button on the
remote control.
3
Select the memory number (1 - 6) to use
for saving the settings, and then press
the button on the projector's control
panel or the button on the remote
control.
The icon for the memory number selected will
change from to .
Press one of the remote control
memory buttons [1] to [6]
corresponding to the image quality
settings to be retrieved.
The selected memory number will be displayed at
the top-right of the screen, and the setting values
will be applied to the images that are being
projected.
If you select a memory number that
already contains stored settings, the
previous settings will be cleared and the
current settings will be stored in their
place.
Retrieving Saved Image Quality Settings
•
••
• If you press one of the remote control
memory buttons [1] to [6] that has no
stored memory settings, the images
being projected will not change.
•
••
•
Memory settings that have been
applied to images will be retained even
when the projector's power is turned
off. The same memory adjustment
settings will be applied to images that
are projected the next time the
projector's power is turned on.
•
••
• The aspect setting retrieved from
memory may not be applied to the
images if they are 16:9 images or if the
input signal images have a particular
resolution.
Image
Picture Quality
Color Adjustment
Picture Mode Dynamic
Memory Save
Reset
Setup Info
Return
Reset
:Enter
:Return :Select
ESC
Memory1
[Memory]
Memory2
Memory3
Memory4
Memory5
Return
:Setting:Return
:Select
ESC
Memory6
STANDBY/ON
ESCAPE MENU
ASPECT INPUT
PATTERN SETTING
HIDE
INPUT
PAT TIRIS
SETTING
ASPECT
ESCAPE
LIGHT
MENU
Projector
Remote control
456
123
VIDEO
BD4
S VIDEO
A
INPUT
MEMORY
HDMI
Memory 5
Remote control