Filter
Top Products
Chapter 11 Zones
ZyWALL 110/310/1100 Series User’s Guide
213
The following table describes the labels in this screen.
11.3 Zone Edit
The Zone Edit screen allows you to add or edit a zone. To access this screen, go to the Zone
screen (see Section 11.2 on page 212), and click the Add icon or an Edit icon.
Figure 123 Network > Zone > Add
Table 78 Configuration > Network > Zone
LABEL DESCRIPTION
User Configuration /
System Default
The ZyWALL comes with pre-configured System Default zones that you cannot
delete. You can create your own User Configuration zones
Add Click this to create a new, user-configured zone.
Edit Double-click an entry or select it and click Edit to open a screen where you can
modify the entry’s settings.
Remove To remove a user-configured trunk, select it and click Remove. The ZyWALL
confirms you want to remove it before doing so.
Object References Select an entry and click Object References to open a screen that shows which
settings use the entry. See Section 7.3.2 on page 122 for an example.
# This field is a sequential value, and it is not associated with any interface.
Name This field displays the name of the zone.
Member This field displays the names of the interfaces that belong to each zone.