Filter
Top Products
Chapter 31 AAA Server
ZyWALL 110/310/1100 Series User’s Guide
407
Figure 269 Configuration > Object > AAA Server > RADIUS > Add
The following table describes the labels in this screen.
Table 156 Configuration > Object > AAA Server > RADIUS > Add
LABEL DESCRIPTION
Name Enter a descriptive name (up to 63 alphanumerical characters) for identification purposes.
Description Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Server Address Enter the address of the RADIUS server.
Authentication
Port
Specify the port number on the RADIUS server to which the ZyWALL sends authentication
requests. Enter a number between 1 and 65535.
Backup Server
Address
If the RADIUS server has a backup server, enter its address here.
Backup
Authentication
Port
Specify the port number on the RADIUS server to which the ZyWALL sends authentication
requests. Enter a number between 1 and 65535.
Timeout Specify the timeout period (between 1 and 300 seconds) before the ZyWALL disconnects
from the RADIUS server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the RADIUS server or the
RADIUS server is down.
Case-sensitive
User Names
Select this if you want configure your username as case-sensitive.
Key Enter a password (up to 15 alphanumeric characters) as the key to be shared between the
external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the external
authentication server and the ZyWALL.