Filter
Top Products
Chapter 36 DHCPv6
ZyWALL 110/310/1100 Series User’s Guide
439
36.2.1 DHCPv6 Request Add/Edit Screen
The Request Add/Edit screen allows you to create a new request object or edit an existing one.
To access this screen, go to the Request screen (see Section 27.2 on page 373), and click either
the Add icon or an Edit icon.
Figure 290 Configuration > DHCPv6 > Request > Add
The following table describes the labels in this screen.
36.3 The DHCPv6 Lease Screen
The Lease screen allows you to add, edit, and remove DHCPv6 lease type objects. To access this
screen, login to the Web Configurator, and click Configuration > Object > DHCPv6 > Lease.
Type This field displays the request type of each request object.
Interface This field displays the interface used for each request object.
Value This field displays the value for each request object.
Table 170 Configuration > Object > DHCPv6 > Request (continued)
LABEL DESCRIPTION
Table 171 Configuration > DHCPv6 > Request > Add
LABEL DESCRIPTION
Name Type the name for this request object. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Request Type Select the request type for this request object. You can choose from Prefix
Delegation, DNS Server, NTP Server, or SIP Server.
Interface Select the interface for this request object.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.