Filter
Top Products
Chapter 37 System
ZyWALL 110/310/1100 Series User’s Guide
461
The following table describes the labels in this screen.
37.7.6 Customizing the WWW Login Page
Click Configuration > System > WWW > Login Page to open the Login Page screen. Use this
screen to customize the Web Configurator login screen. You can also customize the page that
displays after an access user logs into the Web Configurator to access network services like the
Internet. See Chapter 27 on page 371 for more on access user accounts.
Table 185 Configuration > System > Service Control Rule > Edit
LABEL DESCRIPTION
Create new
Object
Use this to configure any new settings objects that you need to use in this screen.
Address Object Select ALL to allow or deny any computer to communicate with the ZyWALL using this
service.
Select a predefined address object to just allow or deny the computer with the IP address
that you specified to access the ZyWALL using this service.
Zone Select ALL to allow or prevent any ZyWALL zones from being accessed using this service.
Select a predefined ZyWALL zone on which a incoming service is allowed or denied.
Action Select Accept to allow the user to access the ZyWALL from the specified computers.
Select Deny to block the user’s access to the ZyWALL from the specified computers.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving