Filter
Top Products
Chapter 20 IPSec VPN
ZyWALL 110/310/1100 Series User’s Guide
303
Figure 185 Configuration > VPN > IPSec VPN > Concentrator > Edit
Each field is described in the following table.
20.5 ZyWALL IPSec VPN Client Configuration Provisioning
Use the Configuration > VPN > IPSec VPN > Configuration Provisioning screen to configure
who can retrieve VPN rule settings from the ZyWALL using the ZyWALL IPSec VPN Client. In the
ZyWALL IPSec VPN Client, you just need to enter the IP address of the ZyWALL to get all the VPN
rule settings automatically. You do not need to manually configure all rule settings in the ZyWALL
IPSec VPN client.
VPN rules for the ZyWALL IPSec VPN Client have certain restrictions. They must not contain the
following settings:
• AH active protocol
• NULL encryption
• SHA512 authentication
• A subnet or range remote policy
Table 112 VPN > IPSec VPN > Concentrator > Edit
LABEL DESCRIPTION
Name Enter the name of the concentrator. You may use 1-31 alphanumeric characters, underscores(_),
or dashes (-), but the first character cannot be a number. This value is case-sensitive.
Member Select the concentrator’s IPSec VPN connection policies.
Note: You must disable policy enforcement in each member. See Section 20.2.1 on page 286.
IPSec VPN connection policies that do not belong to a VPN concentrator appear under Available.
Select any VPN connection policies that you want to add to the VPN concentrator and click the
right arrow button to add them.
The VPN concentrator’s member VPN connections appear under Member. Select any VPN
connections that you want to remove from the VPN concentrator, and click the left arrow button
to remove them.
OK Click OK to save your changes in the ZyWALL.
Cancel Click Cancel to exit this screen without saving.