Filter
Top Products
Chapter 36 DHCPv6
ZyWALL 110/310/1100 Series User’s Guide
440
Figure 291 Configuration > Object > DHCPv6 > Lease
The following table describes the labels in this screen.
36.3.1 DHCPv6 Lease Add/Edit Screen
The Lease Add/Edit screen allows you to create a new lease object or edit an existing one.
To access this screen, go to the Lease screen (see Section 36.3 on page 439), and click either the
Add icon or an Edit icon.
Figure 292 Configuration > DHCPv6 > Lease > Add
Table 172 Configuration > Object > DHCPv6 > Lease
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove
it before doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings
use the entry. See Section 7.3.2 on page 122 for an example.
# This field is a sequential value, and it is not associated with a specific object.
Name This field displays the name of each lease object.
Type This field displays the request type of each lease object.
Interface This field displays the interface used for each lease object.
Value This field displays the value for each lease object.