Filter
Top Products
Chapter 37 System
ZyWALL 110/310/1100 Series User’s Guide
445
Figure 294 Configuration > System > USB Storage
The following table describes the labels in this screen.
37.4 Date and Time
For effective scheduling and logging, the ZyWALL system time must be accurate. The ZyWALL’s
Real Time Chip (RTC) keeps track of the time and date. There is also a software mechanism to set
the time manually or get the current time and date from an external server.
To change your ZyWALL’s time based on your local time zone and date, click Configuration >
System > Date/Time. The screen displays as shown. You can manually set the ZyWALL’s time
and date or have the ZyWALL get the date and time from a time server.
Table 175 Configuration > System > USB Storage
LABEL DESCRIPTION
Activate USB
storage service
Select this if you want to use the connected USB device(s).
Disk full warning
when remaining
space is less
than
Set a number and select a unit (MB or %) to have the ZyWALL send a warning message
when the remaining USB storage space is less than the value you set here.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to return the screen to its last-saved settings.