ZyWALL 110/310/1100 Series User’s Guide 526
CHAPTER 43
Shutdown
43.1 Overview
Use this to shutdown the device in preparation for disconnecting the power. See also Section on
page 31 for information on different ways to start and stop the ZyWALL.
Always use the Maintenance > Shutdown > Shutdown screen or the
“shutdown” command before you turn off the ZyWALL or remove the
power. Not doing so can cause the firmware to become corrupt.
43.1.1 What You Need To Know
Shutdown writes all cached data to the local storage and stops the system processes.
43.2 The Shutdown Screen
To access this screen, click Maintenance > Shutdown.
Figure 374 Maintenance > Shutdown
Click the Shutdown button to shut down the ZyWALL. Wait for the device to shut down before you
manually turn off or remove the power. It does not turn off the power.
You can also use the CLI command shutdown to shutdown the ZyWALL.