Blade ICE G8124 Personal Computer User Manual


 
BLADEOS 6.5.2 Application Guide
224 Chapter 15: Basic IP Routing BMD00220, October 2010
5. Assign a VLAN to each IP interface.
Now that the ports are separated into VLANs, the VLANs are assigned to the appropriate IP
interface for each subnet. From Table 22 on page 223, the settings are made as follows:
6. Configure the default gateway to the routers’ addresses.
The default gateway allows the switch to send outbound traffic to the router:
7. Enable IP routing.
8. Verify the configuration.
Examine the resulting information. If any settings are incorrect, make the appropriate changes.
RS G8124(config)# interface ip 1 (Select IP interface 1)
RS G8124(config-ip-if)# ip address 205.21.17.3
RS G8124(config-ip-if)# ip netmask 255.255.255.0
RS G8124(config-ip-if)# vlan 1 (Add VLAN 1)
RS G8124(config-ip-if)# enable
RS G8124(config-vlan)# exit
RS G8124(config)# interface ip 2 (Select IP interface 2)
RS G8124(config-ip-if)# ip address 100.20.10.1
RS G8124(config-ip-if)# ip netmask 255.255.255.0
RS G8124(config-ip-if)# vlan 2 (Add VLAN 2)
RS G8124(config-ip-if)# enable
RS G8124(config-ip-if)# exit
RS G8124(config)# interface ip 3 (Select IP interface 3)
RS G8124(config-ip-if)# ip address 131.15.15.1
RS G8124(config-ip-if)# ip netmask 255.255.255.0
RS G8124(config-ip-if)# vlan 3 (Add VLAN 3)
RS G8124(config-ip-if)# enable
RS G8124(config-ip-if)# exit
RS G8124(config)# interface ip 4 (Select IP interface 4)
RS G8124(config-ip-if)# ip address 206.30.15.1
RS G8124(config-ip-if)# ip netmask 255.255.255.0
RS G8124(config-ip-if)# vlan 4 (Add VLAN 4)
RS G8124(config-ip-if)# enable
RS G8124(config-ip-if)# exit
RS G8124(config)# ip gateway 1 address 205.21.17.1
RS G8124(config)# ip gateway 1 enable
RS G8124(config)# ip routing
RS G8124(config)# show vlan
RS G8124(config)# show interface information
RS G8124(config)# show interface ip