Filter
Top Products
BLADEOS 6.5.2 Application Guide
296 Chapter 20: OSPF BMD00220, October 2010
2. Enable OSPF.
3. Define the backbone.
4. Define the stub area.
5. Attach the network interface to the backbone.
6. Attach the network interface to the stub area.
7. Configure route summarization by specifying the starting address and mask of the range of
addresses to be summarized.
RS G8124(config)# router ospf
RS G8124(config-router-ospf)# enable
RS G8124(config-router-ospf)# area 0 area-id 0.0.0.0
RS G8124(config-router-ospf)# area 0 type transit
RS G8124(config-router-ospf)# area 0 enable
RS G8124(config-router-ospf)# area 1 area-id 0.0.0.1
RS G8124(config-router-ospf)# area 1 type stub
RS G8124(config-router-ospf)# area 1 enable
RS G8124(config-router-ospf)# exit
RS G8124(config)# interface ip 1
RS G8124(config-ip-if)# ip ospf area 0
RS G8124(config-ip-if)# ip ospf enable
RS G8124(config-ip-if)# exit
RS G8124(config)# interface ip 2
RS G8124(config-ip-if)# ip ospf area 1
RS G8124(config-ip-if)# ip ospf enable
RS G8124(config-ip-if)# exit
RS G8124(config)# router ospf
RS G8124(config-router-ospf)# area-range 1 address 36.128.192.0
255.255.192.0
RS G8124(config-router-ospf)# area-range 1 area 0
RS G8124(config-router-ospf)# area-range 1 enable
RS G8124(config-router-ospf)# exit