Filter
Top Products
4-1
Chapter 4
Statistics
Accessing interface statistics from the Chassis View; available statistics windows
Each port menu in the SmartSwitch 2000 Chassis View provides two statistics
selections: Statistics and I/F Statistics. Selecting the Statistics option will launch
the highest level of statistics available for the selected interface: if the interface
supports RMON, the RMON statistics window will display; if the interface does
not support RMON, or if the RMON Default MIB component has been
administratively disabled, the MIB-II I/F statistics window will display. Selecting
the I/F Statistics option will always display MIB-II interface statistics, regardless
of the level of RMON support available or the current administrative status of the
RMON Default MIB component.
Accessing the Statistics Windows
1. Click on the desired port index in the Chassis View window. The Port menu
will appear.
2. For RMON statistics (where available), click to select Statistics. The RMON
Statistics (Figure 4-1) or MIB-II Interface Statistics (Figure 4-3) window, as
appropriate, will appear.
TIP
Note that the MIB-II I/F Statistics window is also available for all port interfaces Ñ
regardless of their level of RMON support or the current administrative status of the
RMON Default MIB component Ñ via the I/F Summary window accessed from the
Device menu, and via the I/F Statistics option on the bridge Port menu in the Bridge
Status view. For more information about the I/F Summary window, see Viewing I/F
Summary Information, on page 2-20 of Chapter 2, The SmartSwitch 2000 Chassis
View; for more information about the Bridge Status view, see the Bridge chapter in the
SPECTRUM Element Manager Tools Guide.