Filter
Top Products
Managing the Hub 2-59
The SmartSwitch 2000 Chassis View
Flash Memory Available:
Displays (in Kbytes) the current amount of ßash memory that is currently free
and not currently being used for code and data.
DRAM Installed:
Displays the total installed local memory or (DRAM) in Mbytes.
DRAM Available:
Displays (in Kbytes) the current amount of local memory (DRAM) that is
currently free and not currently being used for code and data.
SRAM Installed:
Displays the total amount of shared memory (SRAM) that is installed (in Mbytes).
SRAM Available:
Displays (in Kbytes) the current amount of shared memory (SRAM) that is free
and not currently being used for data.
NVRAM Installed:
Displays (in Kbytes) the total installed non-volatile memory (NVRAM).
NVRAM Available:
Displays (in Bytes) the current amount of non-volatile memory (NVRAM) that is
free and not currently being used for data.
Current Switch Utilization:
Displays the current load on the switch, which is based on a percentage of
maximum switching capacity of 100%.
Peak Switch Utilization:
Displays the peak percentage of switch load (based on a maximum of 100%) that
has occurred on the switch, since power-up or last reset, along with the time and
date that it occurred. This Þeld can be administratively refreshed, as described
below.
Reset Peak Switch Utilization:
This option allows you to clear the Peak Switch Utilization Þeld.The Peak Switch
Utilization Þeld will immediately display the current switch utilization, and
current date and time.
To reset peak switch utilization:
1. Click on next to the Reset Peak Switch Utilization field and select Yes
from the drop down list that will appear. (The default value is No.)
2. Click on the Apply button to reset the displayed peak switch utilization. Note
that when the window refreshes the value in this field will return to No.