Filter
Top Products
Managing the Hub 2-67
The SmartSwitch 2000 Chassis View
Enabling and Disabling VLANs
To enable or disable VLANs:
1. Select the desired VLAN entry in the Configured VLANS list box.
2. In the VLAN Admin field, click to select Enable or Disable.
3. Click the Apply button. The selected VLAN will be enabled or disabled,
depending on your selection.
Updating VLAN Config Window Information
Clicking the Refresh button will update the information displayed in the
ConÞgured VLANs list without closing the window.
Performing Ingress List Configuration
802.1Q VLAN port assignment and ingress list conÞguration operations are
performed using the VLAN Port ConÞg window, which is accessed from the
Device menu in your switchÕs Device View. See Ingress List Operation, on
page 2-62 for details on ingress lists. To launch the window:
1. Click on Device in the Chassis View menu bar to display the Device menu.
2. Click on 802.1Q VLAN, and then select 802.1Q VLAN Port Config. The
VLAN Port Config window, Figure 2-25, will appear.
NOTE
Unless Enable is selected when a VLAN is initially deÞned, it is disabled by default. A
new VLAN that is left in a Disabled state will remain disabled until a port is assigned to
it, at which time it will be automatically enabled. If you are changing a VLANÕs port
assignment, the VLAN should be disabled before changing the port conÞguration. See
Performing Ingress List ConÞguration, on page 2-67, for details on completing your
VLAN port conÞguration.