Cabletron Systems 2000 Switch User Manual


 
Alarm Limits 5-19
Managing Ethernet MicroLAN Switches
within:
This Þeld displays the user-conÞgurable alarm limit timer interval: the amount of
time the selected statistics will be counted before being compared to the
conÞgured thresholds. The allowable values range from 10 seconds to
23 hrs/59 mins/59 secs.
Configuring Alarms
You conÞgure alarms by choosing the alarm you wish to enable, setting the
threshold to the desired level, and selecting a time interval within which that
threshold must occur. You can base the alarms on:
¥ Number of collisions per good packet
¥ Number of total packets
¥ Number of broadcast packets
¥ Percentage of error packets
You can also conÞgure board or port alarm limits so that the board or port will be
disabled when an alarm limit is reached.
Setting the Alarm Limits Time Interval
To set the time interval within which the deÞned alarm thresholds must be
reached in order to trigger an alarm:
1. Click on the clock symbol next to the within: text box in any one of the
alarm limits windows; the interval you set applies to all configured alarms at
all levels. The Alarm Interval window, Figure 5-9, will appear.
Figure 5-9. The Alarm Interval Window
2. Highlight the hour text box (the first box to the left).
NOTE
For more detailed deÞnitions of these statistics and information on the possible network
conditions they represent, consult the Cabletron Systems Network Troubleshooting
Guide, included with this package.