The SmartSwitch 2000 Chassis View
2-46 Managing the Hub
Accessing the UPS Window
At the UPS window, you can conÞgure the UPS ID model type for the
uninterruptable power supply you have attached to the COM port on your
SmartSwitch 2000.
You can also view information concerning the UPS connected to your
SmartSwitch 2000 including:
¥ The amount of time that your UPS has been running since the last start-up
¥ The line voltage and battery output
¥ The actual battery capacity of the UPS (dynamic bar graph)
You can also use a button at the bottom of the window to disconnect your UPS, or
you can use the Test option to initiate a self test of the unit.
To access the UPS window:
1. From the SmartSwitch 2000 Chassis View window, click on Device in the
menu bar to access the Device menu.
2. Select UPS. The UPS window, Figure 2-18, will appear.
Figure 2-18. The UPS Window
!
CAUTION
Do not set the Set UPS ID Þeld unless you have a UPS attached to the
SmartSwitch 2000, or you will disrupt your use of SPECTRUM Element Manager.