Cabletron Systems 2000 Switch User Manual


 
Managing Ethernet MicroLAN Switches
5-12 Repeater Statistics
Configuring the Performance Graphs
To conÞgure the Performance Graphs:
1. Click on the Percent Load button; select the desired Load mode from the
menu.
2. Click on the Frames button; select the desired Frames mode from the menu.
3. Click on the Total Errors button; select the desired Errors mode from the
menu.
Once you have selected a new mode, it will appear in its respective button, and
the Performance Graph and statistics will refresh and begin to measure using the
new mode. To stop monitoring and exit the window, click Cancel.
The Detail Button
The Detail button allows you to view trafÞc processed by the repeater channel,
board, or port according to general frame status (good, errors, or collisions); it also
allows you to view errors by type.
When you click the Detail button, a separate window appears (Figure 5-5) that
displays pie charts and statistics for both frame status and error type.
NOTE
For more detailed deÞnitions of these statistics and information on the possible network
conditions they represent, consult the Cabletron Systems Network Troubleshooting
Guide, included with this package.