Filter
Top Products
Managing the Hub 2-49
The SmartSwitch 2000 Chassis View
and delete existing entries from this table. When you set a source port to redirect
to a destination port, the destination port will transmit out all packets received or
transmitted on the source port.
To access the Port Redirect window:
1. Click on Device in the Chassis View menu bar to display the Device menu.
2. Click Port Redirector. The Port Redirect window, Figure 2-19, will appear.
Figure 2-19. The Port Redirect Window
The current port mappings will be listed in this window. You may add or delete
entries from this window.
To add an entry:
1. Next to the Source Port display box click on and select the desired source
port (Port X) from the drop down list that will appear.
2. Next to the Destination Port display box click on and select the desired
destination port (Port X) from the drop down list that will appear.
3. Click on the Add button to add the redirect pair you have just configured to the
list.
The new entry will now be displayed in the Current Active Entries list in this
window and the port traffic will begin to be redirected.