Filter
Top Products
4-54
4
Service Procedures
Jewel
Some upgrades or product modifications may require you to replace the jewel on the
front panel. The following procedure describes how to replace the jewel.
FIGURE 4-31 Front panel jewel
TO REPLACE FRONT PANEL JEWEL
1. Remove the front panel (see page 4-9).
2. From the back of the front panel, push the jewel out through its slot in the front panel.
3. From the front of the panel, place the new jewel in the slot and press down until it snaps
into place.
Make sure to correctly orient the jewel. The jewel’s lower tabs are larger than
the upper tabs.
4. Replace the front panel (see page 4-10).
5. Reassemble the ColorPASS (see page 4-14).
Jewel