Canon PS-NX6000 Copier User Manual


 
xii
Preface
About the illustrations in this guide
The illustrations in this guide reflect the current shipping version of the ColorPASS at
the time of publication. Components shown in these illustrations are subject to change.
To receive information about any ColorPASS components that do not match the
illustrations in this guide, contact your authorized service/support center.
Terminology and conventions
The terms “replace” and “replacing” are typically used throughout this manual to mean
reinstallation of existing components. Install new components only when necessary.
The term
network administrator” refers to the person responsible for maintaining the
network at the customer site.
The term “Control Panel” refers to the area on the front of the ColorPASS, including the
green/red activity light, the display window (LCD—liquid crystal display), and the
buttons to the right and left of the display window.
The term “side panel” refers to both the plastic and metal pieces of the side panel joined
together. The term “plastics” refers to just the plastic piece.
The term “system software” refers to the software installed on the ColorPASS hard
disk drive.
The term “10/100/1000BaseT” used throughout this manual refers to
10/100/1000 megabits per/second (Mbps) baseband data transmission over
twisted-pair wire.
References to other ColorPASS manuals, such as the
Configuration Guide,
are displayed
in italics.
N
OTE
:
The note format highlights important messages and additional information.
The Caution icon indicates a need for special care and safety when handling
the equipment.