Filter
Top Products
2-5
2
Unpacking the ColorPASS
Unpacking the ColorPASS
The ColorPASS is assembled and shipped from the factory in a box that includes all
necessary cables and documentation, as shown in Figure 2-2 on page 2-6.
TO UNPACK THE COLORPASS
1. Open the box and remove the packing material.
You may want to save the original boxes and packing materials if you need to transport
the ColorPASS at a later date.
2. Remove the contents from the top container. Inspect the contents for visible damage.
The top container should include the following items:
•Bags containing one copier interface cable and one or more AC power cables
(depending on the market region)
•Media package (includes CDs for system software, user software, and user
documentation)
3. Give the media package to the customer or the network administrator.
Let the customer or network administrator know that in order to take full advantage of
the ColorPASS, the user software must be installed on computers that will print to the
ColorPASS.
4. Set aside the remaining components from the top container.
5. Remove the top container and any packing materials.
Set aside the packing material and note the orientation of the ColorPASS inside the
shipping container, in case you need to repack it later.
6. Carefully lift the ColorPASS out of the box.
If you notice shipping damage to any component, be sure to save the shipping container
in case the carrier needs to see it. Call the carrier immediately to report the damage and
file a claim, then call your authorized service/support center. Be ready to furnish the serial
number printed on the back of the ColorPASS.