Filter
Top Products
4-55
4
Control Panel buttons
Control Panel buttons
The Control Panel buttons attach directly to the front of the UIB and extend through
channels in the front panel. When correctly positioned, the buttons make contact with
the button pads on the front of the UIB and provide users with manual status and
control capability from the Control Panel.
TO REPLACE CONTROL PANEL BUTTONS
1. Remove the front panel (see page 4-9).
2. Attach the buttons to the UIB.
Insert the pointed tabs on the underside of the buttons into the appropriate holes on the
UIB. Make sure to orient the buttons to match the channels in the front panel.
FIGURE 4-32 Replacing Control Panel buttons
3. Replace the front panel (see page 4-10).
4. Reassemble the ColorPASS (see page 4-14) and verify its functionality (see page 4-16).
Button
orientation