Filter
Top Products
9-28
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
OL-10101-02
Chapter 9 Configuring IEEE 802.1x Port-Based Authentication
Displaying IEEE 802.1x Statistics and Status
Resetting the IEEE 802.1x Configuration to the Default Values
Beginning in privileged EXEC mode, follow these steps to reset the IEEE 802.1x configuration to the
default values.
Displaying IEEE 802.1x Statistics and Status
To display IEEE 802.1x statistics for all interfaces, use the show dot1x all statistics privileged EXEC
command. To display IEEE 802.1x statistics for a specific interface, use the show dot1x statistics
interface interface-id privileged EXEC command.
To display the IEEE 802.1x administrative and operational status for the switch, use the show dot1x all
privileged EXEC command. To display the IEEE 802.1x administrative and operational status for a
specific interface, use the show dot1x interface interface-id privileged EXEC command.
For detailed information about the fields in these displays, see the command reference for this release.
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
interface interface-id Specify the interface to be configured, and enter interface configuration
mode.
Step 3
dot1x default Reset the configurable IEEE 802.1x parameters to the default values.
Step 4
end Return to privileged EXEC mode.
Step 5
show dot1x interface interface-id Verify your entries.
Step 6
copy running-config startup-config (Optional) Save your entries in the configuration file.