Filter
Top Products
Contents
v
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
OL-10101-02
Configuring Alarm Profiles 3-9
Creating or Modifying an Alarm Profile 3-9
Attaching an Alarm Profile to a Specific Port 3-10
Enabling SNMP Traps 3-11
Displaying Catalyst 2955 Switch Alarms Status 3-11
CHAPTER
4 Assigning the Switch IP Address and Default Gateway 4-1
Understanding the Boot Process 4-1
Assigning Switch Information 4-2
Default Switch Information 4-3
Understanding DHCP-Based Autoconfiguration 4-3
DHCP Client Request Process 4-4
Configuring DHCP-Based Autoconfiguration 4-5
DHCP Server Configuration Guidelines 4-5
Configuring the TFTP Server 4-6
Configuring the DNS 4-7
Configuring the Relay Device 4-7
Obtaining Configuration Files 4-8
Example Configuration 4-9
Understanding DHCP-Based Autoconfiguration with a Saved Configuration 4-10
Limitations and Restrictions 4-10
Configuring DHCP-Based Autoconfiguration with a saved configuration 4-11
Manually Assigning IP Information 4-12
Checking and Saving the Running Configuration 4-12
Modifying the Startup Configuration 4-13
Default Boot Configuration 4-13
Automatically Downloading a Configuration File 4-13
Specifying the Filename to Read and Write the System Configuration 4-14
Booting Manually 4-14
Booting a Specific Software Image 4-15
Controlling Environment Variables 4-16
Scheduling a Reload of the Software Image 4-17
Configuring a Scheduled Reload 4-18
Displaying Scheduled Reload Information 4-19
CHAPTER
5 Configuring Cisco IOS CNS Agents 5-1
Understanding Cisco Configuration Engine Software 5-1
Configuration Service 5-2